It’s very simple. You don’t change your engine or ECU (car computer). A quart-size (95o cc) container, usually made of glass but can also be plastic or metal, is placed somewhere under the hood. You fill it with distilled water and cheap household electrolyte (causes electrical current). The device gets vacuum and 12 volts from the engine, and produces water gas as shown in the video inside.

The electrical connection is very basic - we have eliminated the need to use relays or any other complications. The device connects to the 12 volts of your battery via the ignition switch, to prevent hydrogen production when the engine is off. The device is fuse protected and draws very little current, only 1-3 amps! This could take 10 minutes or less to connect.

The water gas is then supplied to the engine’s intake manifold or carburetor as shown in the diagram. Our design is simple, effective and safe. Don’t worry, you will get full instructions and diagrams that make it simple and clear. It takes several of minutes to connect.

Due to our unique design - stainless steel spirals rather than plates - this device produces hho gas for less electric power out of your battery (compared to older technology based on stainless steel plates). The spirals create a magnetic force that helps splitting water into hydrogen/oxygen - and are also very easy to make by hand, compared to the plates that require expensive machinery to cut and process.

Let’s say you drive a vehicle that gets 20 miles per gallon and you cover 2,000 miles per month, then you’re consuming 100 gallons of gasoline a month. At $4 per gallon this equals to $4,800 yearly out of your pocket! I know in europe you’re paying twice or more. Save 35% fuel and you will have saved $1,680 per year in gasoline. If you are three or four drivers in the family, this yearly savings increases dramatically - you get to keep $5,040 each and every year!

Related Posts

No related posts